top of page
Illuminated Pilot Car Sign Metal Frame

Illuminated pilot car or escort car signs offer a premium, durable, back-lit signage option for the heavy haul industry.  These signs are made from a durable metal construction with a white powder coat painted finish.  The signs include white LED lighting for the sign box and four amber LED corner lights (2 facing each way).  The light system is wired through a 6-way trailer plug and has a unique feature that the front facing and rear facing lights can be turned on/off independantly.  INCOM carries spare parts for these signs to ensure compliance while on the road.  The sign is sold as shown and does not include any sign inserts, these must be purchased seperatly and will require two inserts (one for each side) to complete the sign.  Overall sign dimensions are 72" wide by 5" deep by 24-1/2" tall including mounting bracket and corner lights.  Sign frame requires the use of an additional support bracket (not supplied) due to wind pressure on front of sign during use.  Built to accomodate sign inserts of 13-1/2" x 71-1/2" - see below.  Sign not to be used at speeds higher than 80km/hr (50mph).  Some simple assembly is required that should not take more than 15-minutes to complete with the provided instruction.  (12-volt electrical).  Comparable Barpek #BP708


Sign inserts sold separately, not included (two required per sign frame application).

TS8131 - Overdimensional Load Canadian ‘D’ Insert (red/white)

TS8132 - WIDE LOAD Sign Insert (black/yellow)

TS8133 - OVERSIZED LOAD Sign Insert (black/yellow)


If you require additional beacons to comply with standards in your region we offer our amber LED (#TS8201) that is commonly used for mounting to the top of the metal pilot car sign box.  It will require some drilling and wiring to complete the installation.


California Residents: California Proposition 65 Warning Notice

Illuminated Pilot Car Sign Metal Frame

SKU: TS8130
  • Due to the oversized dimensions of this product when packaged, additional shipping charges will apply.

  • Disclaimer: It is the sole responsibility of the user to determine the suitability of this product for their application, including, but not limited to, identifying the risk and its severity. When in doubt consult a qualified safety and warnings professional.

bottom of page